Head Supports

Positioning Holders

Ready-Pack Kits FacileAid™ Cushions
# FAR-50, (Net W. : 100g) # FAR-70, (Net W. : 140g)

The ready-pack kits of FacileAid™ cushions are ideal to produce besopke pillows because they have no odour for use and techinicans can produce conforomal cushions faster in about 8 mininutes without spraying water or heating by ovens.

Bottle-Pack Kits FacileAid™ Cushions
# FAB-170 (Net W.: 360g)

Every kit comes with two plastic bottles and one T-Shaped nylon bag It is quite ideal to produce bespoke cushion while using large S-Frame or V-Frame masks.

Mold Maker is ideal to use along with MoldCare™ or two-part foaming agents to produce posterior cushions. The additional built-in handles and pegs of # MMR-101 can help users mount them onto Type-S overlays and take off. All the Mold Makers are made of plastics with light weights and very helpful for the mold production.

# MMR-101-U
This mold maker is designed to produce bespoke pillows while using standard head boards and U-Frame Masks to get better immobilization.

# MMR-102
Mold maker # MMR-102 is ideal to produce head and back cushions while using large S-Frame masks on different overlays.

ThermoMold™ Cushions

# TMC-10x16	Smallest head/neck	# TMC-20x25	Medium head/neck
# TMC-15x20	Small head/neck	# TMC-20x45	Large head/neck
# TMC-18x35-C	Chamfered Head/Neck

*** Bespoke size can be ordered upon request.
ThermoMold™ Cushions contain a proprietary mix of lightweight, high-quality fillings surrounded by a thin layer of low-temperature thermoplastic and will become soft and pliable when heated in an oven (or a heat pan) to provide a calming effect on most patients during molding. Once cool, the cushions become firm and rigid, ensuring excellent reproducibility and precise placement for highly accurate treatments. The cushions can be used with Silverman™ headrests, and they also fit under a thermoplastic mask to create 360° custom support and immobilization. But they still can be used with a neck block to get optimal cervical spine support and immobilization without using Silverman™. The cushions have no odor and shrinkage problems and, therefore, are ideal to produce individual headrest, especially it can be reheated and reformed when needed.

# HOL-220 Heat Oven (Large)
I. D. : 75cm W x 50cm D x 21cm H
O.D. : 105cm W x 73cm D x 42.5 H
Power: 220V, 3,750W, Weight: 92 kg
* Specifications change without notification

# SPT-HPN Heat Pan Netting
Heavy duty double-wire netting to prevent low-melt masks from sticking pan or oven,
50cm x 62cm with mesh: 4mm x 4mm

MoreCare™ Cushions
MoreCare™ Cushions are made of unique PS beads with hydraulic resins and stretchable cover materials to increase patient comfort. Due to its low specific gravity (0.1) and CT number (less than -800), it is ideal to be used through CT Simulation and MR to therapeutic procedure. Simply applying a little water with a spray bottle evenly across both sides of the cushions, technicians can easily model the patients’ posture needed for radiation treatments. Once getting the desired position, please allow 6~10 minutes for head molds and 15~20 minutes for breast molds to set. Letting the finished cushions still for additional time will increase their strength. MoreCare™ cushions have longer shelf life up to 2 years without hardening problem and have other benefits such as less order, less work-in-preparation for use and better stretchability. We believe you will love to use MoreCare™ cushions after tests.

MoreCare™ Cushions

# MCC-15x20	Small head/neck		More Care, Less Odor More Space, Less Tools More Comfort, Less Pain More Flexibility, Less Time More Accuracy, Less Gaps More Efficiency, Less Power More Throughput, Less Failure More Stretchability, Less Efforts
# MCC-20x25	Medium head and neck
# MCC-20x34	Extended head and neck
# MCC-20x34-C	Chamfered head/neck
# MCC-20x45	Large head/neck
# MCC-58x47	Type-S shape
# MCC-58x65	Trapezoid shape
# MCC-60x40	Small Breast
# MCC-60x60	large Breast


# MCC-15x20	# MCC-20x25	# MCC-20x34-C	# MCC-20x45

# MCC-60x40	# MCC-58x47	# MCC-58x65	a complimentary tool for your first order !

Various applications of MoreCare™ Cushions with U-Frame Masks, S-Frame Masks with Disk push and pull docking system & P-Frame 3D Masks for proton therapy

Shape
Shape
Size	20cm x 25cm	20cm x 25cm	20cm x 25cm	20cm x 25cm	20cm x 25cm
Catalog	# EUS-24	# EUM-24	# ESD-24	# ESD-4447	# EPD-5265

* Please refer to U-Frame / S-Frame / P-Frame Masks page to select the material and thickness.

TIMO Foam Pillows
* Durable pillows provide good support for most adults & can be cleaned with water based antiseptic cleaner.
* Different heights and contours provide the versatility needed to attain the desired head angulation.
* Soft enough for patient comfort, yet firm enough to prevent sinking after the head is positioned.
* Six pillows in a set are indexed A ~ F and color-coded in 6 standard colors for easy identification.
* Pillows in 6 standard colors ( Blue, Green, Purple, Olive, Brown & Silver ) are in stock.
* Pillows can be ordered with specific colors in any of 6 standard colors ~ Blue, Green, Purple, Olive, Brown and Silver (gray), say,
# TIMO-A @P for “A” in Purple, # TIMO-B @S for “B” in Silver (gray).
* Pillows with non-standard colors are available with longer lead-time, say, Yellow # TIMO-A @Y.
* Non-coated plain pillows in stock are recommended for environmental concerns and cost effectiveness.

Unlike TIMO from other makers, our TIMO pillows come with guaranteed consistent dimensions!


# TIMO-KIT	# TIMO-A	# TIMO-B	# TIMO-C	# TIMO-D	# TIMO-E	# TIMO-F

TIMO Foam Pillows with 2.0mm Acrylic Shims plates (-AS) and 1.0mm Carbon fiber Shim platess (-CS)


# TIMO-KIT-AS	# TIMO-A-AS	# TIMO-B-AS	# TIMO-C-AS	# TIMO-D-AS	# TIMO-E-AS	# TIMO-F-AS
# TIMO-KIT-CS	# TIMO-A-CS	# TIMO-B-CS	# TIMO-C-CS	# TIMO-D-CS	# TIMO-E-CS	# TIMO-F-CS

# TIMO-BWF TIMO Head Supports with Blocks and Wedges
All six TIMO pillows comes with 3mm acrylic adaptive plates with recess to accommodate the blocks and wedges made of durable Foams. One complete kit includes: color-coded pillows (6 ea.), 2 cm elevation block, 3 cm elevation block and 4 cm elevation block (1 ea.) respectively plus 9° slant wedge, 13.5° slant wedge, 18° slant wedge (1 ea.) respectively. Block and Wedge kits made of Plastic or Carbon fiber can be ordered by # TIMO-BWP & # TIMO-BWC.

# TIMO-RFBK-2
Elevation Block, 2cm
# TIMO-RFBK-3
Elevation Block, 3cm
# TIMO-RFBK-4
Elevation Block, 4cm

# TIMO-RFWG-9
Slant Wedge, 9°
# TIMO-RFWG-13.5
Slant Wedge, 13.5°
# TIMO-RFWG-18
Slant Wedge, 18°

# TIMO-PP       Prone Pillow
# TIMO-PP-C   Prone Pillow for children
# TIMO-PP-G   Prone Pillow with gel pads
Prone pillows can fit onto the indents of head boards and allow the patient to breathe freely for prone set. # TIMO-PP-G is made of rigid foam with built-in bolus gel pads to support patients better than the traditional gel pillows which are easy to deform for fractional treatments. In addition, the bolus gel pads can be easily changed for different patients in the interests of hygiene.

# TIMO-PH Prone Holder
Made of durable foam and its contoured corners eliminate shoulder impingement and center portal opens the patient’s field of view to improve patient comfort.

The dimensions and shapes of the traditional PU-based TIMO foam pillows may vary from batch to batch due to different moulds and production parameters. Therefore, it must be done to compare the new coming TIMO pillows and the existing headrests to ensure that proper fit is reproducible for treatment cycle. In addition, it is difficult to accurately position pillow at the same place on the adapter (Lexan or Acrylic plates) to fit onto head boards, consequently, TIMO with adaptive plates will fail to meet the treatment accuracy requested nowadays.

Now, our High Precision Pillows should be the best solution for the problems mentioned above because they have accurate dimensions and can exactly fit onto the headboards without using additional adaptive plates.

High Precision Pillows for CIVCO™ Head Boards with Blocks & Wedges



# HPPC-KIT	# HPPC-A	# HPPC-B	# HPPC-C	# HPPC-D	# HPPC-E	# HPPC-F

# HPPC-KIT-BWF High Precision Pillows for CIVCO™ Head Boards
All six foam pillows have rectangular recess to accommodate the blocks and wedges made of rigid Foams.
One kit # HPPC-KIT-BWF comes with 6 each of color-coded pillows(1 ea.), elevation block in
heights 2cm, 3cm and 4cm (1 ea.) and slant wedge in 9°, 13.5° and 18° (1 ea.) respectively.

# HPPC-2-EBF
Elevation Block, 2cm, Rigid Foam
# HPPC-3-EBF
Elevation Block, 3cm, Rigid Foam
# HPPC-4-EBF
Elevation Block, 4cm, Rigid Foam

# HPPC-9-WGF
Slant Wedge, 9°, Rigid Foam
# HPPC-13.5-WGF
Slant Wedge, 13.5°, Rigid Foam
# HPPC-18-WGF
Slant Wedge, 18°, Rigid Foam

High Precision Pillows for Orfit™ head boards with Blocks & Wedges



# HPPO-KIT	# HPPO-A	# HPPO-B	# HPPO-C	# HPPO-D	# HPPO-E	# HPPO-F

# HPPO-KIT-BWF High Precision Pillows for Orfit™ head boards
All six foam pillows have 2 round pegs to accommodate the blocks and wedges made of rigid Foams. One kit # HPPO-KIT-BWF comes with color-coded pillows (6 each), elevation blocks in heights 2cm, 3cm and 4cm (1 ea.) slant wedge in 9°, 13.5° and 18° (1 ea.) respectively. Pillow Kits with blocks and wedges made of different materials, say, Plastic or Carbon fiber can be ordered by Catalog # HPPO-KIT-BWP & # HPPO-KIT-BWC.

# HPPO-2-EBF
Elevation Block, 2cm, Rigid Foam
# HPPO-3-EBF
Elevation Block, 3cm, Rigid Foam
# HPPO-4-EBF
Elevation Block, 4cm, Rigid Foam

# HPPO-9-WGF
Slant Wedge, 9°, Rigid Foam
# HPPO-13.5-WGF
Slant Wedge, 13.5°, Rigid Foam
# HPPO-18-WGF
Slant Wedge, 18°, Rigid Foam

High Precision Pillows for SinMed Posifix™ head board with Blocks & Wedges



# HPPS-KIT	# HPPS-1	# HPPS-2	# HPPS-3	# HPPS-4	# HPPS-5

# HPPS-KIT-BWF High Precision Pillows for Posifix™ head boards
All five foam pillows have 2 round pegs to accommodate the blocks and wedges made of rigid Foams. One kit # HPPS-KIT-BWF comes with 1 kit of pillows (5 ea.), quantity 1 of each elevation block in heights 2cm, 3cm and 4cm and quantity 1 of each slant wedge in 9°, 13.5° and 18°. Colored pillows are available upon request.

# HPPS-2-EBF
Elevation Block, 2cm, Rigid Foam
# HPPS-3-EBF
Elevation Block, 3cm, Rigid Foam
# HPPS-4-EBF
Elevation Block, 4cm, Rigid Foam

# HPPS-9-WGF
Slant Wedge, 9°, Rigid Foam
# HPPS-13.5-WGF
Slant Wedge, 13.5°, Rigid Foam
# HPPS-18-WGF
Slant Wedge, 18°, Rigid Foam

Comfort Pillows with and without punched holes for locating pegs on head boards


# SILVER-KIT	# SILVER-A	# SILVER-B	# SILVER-C	# SILVER-D	# SILVER-E	# SILVER-F

These pillows have almost the same contours like Silverman™ pillows made in USA but are more conformal and comfortable for most patients during treatments. Each pillow has letter sequence for identification and available both in a set of kits ( A ~ F ) or individually. Just tell us the diameters of the punched holes you need and the brand of the head board, Comfort Pillows with guaranteed consistent punched holes will always be delivered to your hands with.

Custom Head Cradles
The Custom Head Cradle is a shell and customizable cushion device and its unique shape of the shell was designed to encourage the cushion to return the patient to a repeatable position from fraction to fraction.

Allows more support under patient's neck for less superior-inferior movement (pitch)
Provides enhanced comfort so patient is less likely to move during treatment
Two pins centered inside the shell provide fixed, repeatable points while preventing the cushion from moving
Deep “bowl” shape provides a deeper head capture than using a cushion alone or standard head supports
Compatible with Vision RT's Align RT® camera system when used with Reinforced V3 Clear Vision masks


# CHC-001 for Posifix@ Baseplates	# CHC-002 for S-Type Overlays

Head Supports Positioning Holders

Head Supports

Positioning Holders